MANUFACTURE OF TILE CUTTER AND TILING TOOLS (SINCE 1996).

Language:

SEARCH

Home / All / Tile Carrying & Laying Tools / Electric Suction Cup for Tile Carrying / Dual Motor Electric Vacuum Suction Cup Lifter 260KG for Tile Stone Glass with 98mm Narrow Pad Auto Re-vacuum Battery K02-04

Dual Motor Electric Vacuum Suction Cup Lifter 260KG for Tile Stone Glass with 98mm Narrow Pad Auto Re-vacuum Battery K02-04

Share
Categories	Electric Suction Cup for Tile Carrying
Brand	TILER tile cutting and laying tools distrubutor
Product Specifications	K02-04
Max Lifting Capacity	260 kg
Suction Cup Size	268 × 98 mm
Material of suction cup	Nitrile rubber
Nominal voltage	3.7V
Battery capacity	4000mAh
Motor Configuration	Dual motor
Rated power	8W
Charging time	3h
Service time under normal conditions	3-4 days
Charging Port	Type-C
Download

Contact Now

Add to Wishlist

Detail Information

◢ SPECIFICATION

ART	QTY/INNER BOX	QTY/OUTER BOX
K02-04	1PC	8PCS

◢ DESCRIPTION

Dual Motor Electric Vacuum Suction Cup Lifter 260KG for Tile Stone Glass with 98mm Narrow Pad Auto Re-vacuum Battery K02-04

▪ Slim 98 mm pad for strip tiles.

At 268 × 98 mm the pad slips onto narrow strip tiles, sills and thin slabs that a round cup simply overhangs. What used to take two hands now takes one.

▪ Dual motors, 260 kg holding force.

Two motors pull the vacuum down fast and hold far stronger than a single-motor cup. Move long, narrow pieces without asking a second person to steady them.

▪ Auto re-vacuum — the grip stays locked.

Smart pressure monitoring watches the vacuum the whole time and re-pulls it the moment pressure drops. The load never quietly loosens while you work.

▪ Detachable 4,000 mAh battery.

Swaps in seconds and charges over any Type-C cable in about 3 hours. One charge covers 3 to 4 days of typical use, and a spare pack means no downtime.

▪ Tap to align, level every time.

A steel tapping plate lets you nudge tile position with a tap, and the built-in bubble level keeps every install flat.

▪ Grips micro-textured faces too.

The nitrile pad holds smooth tiles, stone and glass as well as lightly textured surfaces with unevenness up to 2 mm - and it leaves polished faces unmarked.

▪ Safe hoisting.

Reinforced bracket with 4 steel lifting eyes rigs up in seconds for crane and hoist work. Auto power-off after 15 minutes of idle time saves the battery.

◢FAQ

How much can it really lift?

Up to 260 kg on clean, dry, smooth, non-porous surfaces like glazed tiles, glass and polished stone. On porous, rough or curved surfaces holding force drops sharply - always test before lifting critical loads.

Why a narrow pad instead of a round cup?

The 98 mm wide pad fits strip tiles, narrow sills and slim slabs that a round cup overhangs. Same body, same 260 kg grip - just a footprint that matches narrow work.

What if the vacuum leaks during work?

Pressure is monitored continuously and the pump re-vacuums automatically when it drops - the grip stays locked without you watching it.

How long does the battery last?

The detachable 4,000 mAh pack covers 3 to 4 days of typical use and refills in about 3 hours via Type-C. A spare battery lets you work non-stop.

Can I hang the load from a crane?

Yes - the reinforced bracket has 4 steel lifting eyes. For overhead lifting, always use dual protection with a safety sling.

What customization options are available through the OEM/ODM program?

Our OEM/ODM partnerships offer flexibility to customize branding, adjust product specifications, or even develop unique versions of the suction cup to meet your specific market needs and customer demands.

KeyWords